Mk1 Rabbit/Jetta/Scirocco I - Poly Front Motor Mount |
|
$15.95
 |
Mk1 Rabbit/Jetta I/Scirocco I - Poly Rear Trans. Mount |
|
$34.95
|
Mk1 R/J I/S I - Poly Front Control Arm Bushings (Set of 4) |
|
$39.95
|
Mk1 R/Cab/J/S I & II - Poly Rear Trailing Arm Bushings (Set of 2) |
|
$22.95
|
Mk1 R/Cab/J/S I & II - Poly Upper Rear Shock Mount Bushings (Set of 4) |
|
$24.95
|
Mk1 R/J/S I - Poly Manual Steering Rack Bushings (Set of 2) |
|
$19.95
|
Mk1 R/J I/S I & II/Cab - Poly Front Shock Bump Stops (Set of 2) |
|
$29.95
|
Mk1 R/Cab/J/S I & II - Poly Right Engine Mount Insert 74.6mm |
|
$19.95
|
Mk1 R/Cab/J/S I & II - Poly Left Trans Mount Insert 64.4mm |
|
$19.95
|
Mk2 Golf/Jetta/Corrado - Poly Front Shock Bump Stops (Set of 2) |
|
$29.95
|
Mk2 Golf/Jetta/Corrado/Mk3 all - Poly Front Control Arm Bushings (Set of 4) |
|
$39.95
|
Mk2 Golf/Jetta - Poly Manual Steering Rack Bushings (Set of 2) |
|
$19.95
|
Mk2 G/J/C - Poly Upper Rear Shock Mount Bushings (Set of 4) |
|
$24.95
|
Mk2 G/J/C - Poly Rear Trailing Arm Bushing Inserts (Set of 2) |
|
$19.95
|
Mk2 Golf/Jetta - Poly Right Rear Engine Mount Insert |
|
$24.95
|
Mk3 G/J - Poly Upper Rear Shock Mount Bushings (Set of 4) |
|
$24.95
|
Mk4 - Poly Engine Torque Arm Mount Insert |
|
$24.95
|
Mk5 - Poly Engine Torque Arm Mount Insert |
|
$29.95
|
OE Rear Heavy Duty Bushing - VW Mk4 Golf/Jetta/R32/Audi TT
(Two required per vehicle) |
.jpg)
8N0407181B
|
$19.95
|
OE Front Bushing - VW Mk2/Mk3/Mk4/R32 Mk4/Audi TT (Two required per vehicle) |
.jpg)
357407182
|
$5.95
|
OE Rear Bushing - Mk2/Mk3
(Two required per vehicle) |
.jpg)
191407181E
|
$10.95
|
OE Rear Bushing - Mk4 Golf/Jetta (Not R32)
(Two required per vehicle) |
.jpg)
1J0407181
|
$10.95
|
OE Heavy Duty Bushing Kit (Two Front, Two Rear) - VW Mk4 Golf/Jetta, R32 & Audi TT |
.jpg)
266400
|
$49.95
|
OE Bushing Kit (Two Front, Two Rear) - VW Mk2/Mk3 |
.jpg)
266410
|
$33.80
|
OE Bushing Kit (Two Front, Two Rear) - VW Mk4 Golf/Jetta (Not R32) |
.jpg)
266420
|
$33.80
|
247-PARTS.COM Delrin Front Engine Carrier Bushings
As you know, the front subframe which holds the front motor mount on A2 and A3 VW chassis is made out of rubber, a weak material that deflects under hard use.
247-parts developed a hard bushing made out of black Delrin material which supports the front subframe in a rigid position with a minimal amount of flex. The upside is under drag racing and hard acceleration, the subframe does not move. The downside is that it will transmit some additional noise. These bushings can be used for street and race applications.
Specifications for bushings:
Fully CAD drawn, CNC machined, and true-bored to the proper subframe mounting bracket size.
Note- these are centerless drilled, so it is a perfect fit.
Checkout/View Cart
